Stereo Bonnet Pack for Raspberry Pi Zero W 喇叭套件 (含 Pi Zero W + Adafruit Pi Zero Enclosure + 雙聲道3W喇叭 + I2S轉板)

Remember those cereal commercials that would always say, “part of a complete breakfast”? Well the Pi Zero’s a lot like that bowl of cereal – while it’s great on its own, you need a lot of accessories to make it a complete meal. 

The Pi Zero Stereo W Bonnet Pack sets you up with the WiFi-enabled Pi Zero W, and our I2S 3W Stereo Speaker Bonnet. This bonnet uses digital sound standard I2S right on the 2×20 pin GPIO header, providing really crisp audio. The digital data goes right into the amplifier so there’s no static like you hear from the headphone jack. And it’s super easy to get started. We even include speakers that you can plug right in! Once you’ve set up your Pi Zero, run our installer script, reboot and you’re ready to jam!

Note: Due to popular demand, there might be some delay in shipping products containing Pi Zero W!

Our tutorial will get you set up with instructions, you’ll be rockin’ out in 15 minutes.

《規格》

• Raspberry Pi Zero W x1
• Adafruit Pi Zero Enclosure x1 ==>更換成透明壓克力外殼附散熱片
• Adafruit Stereo Speaker Bonnet Mini Kit x1
• Break-away 0.1″ 2×20-pin Strip Dual Male Header x1
• Enclosed 3 Watt stereo speaker set x1

Don’t forget to make sure you have a good strong 5V power supply – especially if you’re using the 3W 4 ohm speakers at full blast! Our 2.5A power plug is recommended and not included.
You’ll also need a microSD card with NooBs or other Raspberry Pi operating system software, also not included.

Some light through-hole soldering is required to attach the headers onto the Pi Zero and Bonnet. A soldering iron and solder are required to perform this task.