:MOVE mini buggy kit for micro:bit 迷你小車配件組
:MOVE mini 是一個兩輪機器人,適用於自主操作、透過藍牙應用進行遠程控制,或者藉由另一個 micro:bit 透過無線功能作為控制器進行控制。
加上額外的配件,讓您的 :MOVE MINI 變得更加好玩!!
* 注意:本商品不含 micro:bit 開發板 及 :Move mini 小車
《Bulldozer Add-On For The :MOVE MINI 推土機配件》
With this Bulldozer add-on for :MOVE mini for the BBC microbit, everyone’s favourite little programmable robot buggy just got much better. Robots often do more than just :MOVE from A to B, and with this add-on so can :MOVE mini.
Previously on :MOVE mini, we; drew shapes, controlled it via bluetooth, controlled it with a second microbit, and we also coded a variety of light shows. Now, it can totally lift and carry stuff too!
This self assembly bulldozer add-on kit is made from the same materials as :MOVE mini, designed in keeping with the :MOVE mini aesthetic, and also comes with the servo required to move the bulldozer add-on up and down.
There is a very simple Servo:Lite board hack that enables the control of the third servo, you can find out how here. Once the kit is fully assembled, the bulldozer arm can be coded with the Microsoft MakeCode Editor.
Note:
- This kit requires mechanical assembly.
Features:
- When attached to :MOVE mini this kit offers a fun introduction to the world of DIY robotics.
- Code it with the Microsoft MakeCode Editor.
- Use in conjunction with an App and control it over Bluetooth.
- Use the radio function and a second microbit as a controller.
Contents:
- 1 x Set of Buldozer parts.
- 1 x Continous rotation servo.
- 4 x M2 6mm Pan head steel screw.
- 4 x M2 Hex Full width nut.
- 2 x Counter sunk M3 screw.
《Bumper Add-On For The :MOVE MINI 保險桿配件》
With this Bumper add-on for :MOVE mini for the BBC microbit, everyone’s favourite little programmable robot buggy just got much better. If you were looking for an add-on that allows for competitive games, then this is the add-on for you.
Previously on :MOVE mini, we; drew shapes, controlled it via bluetooth, controlled it with a second microbit, and we also coded a variety of light shows. Now, it can totally used to play ball games too!
This self assembly Bumper add-on kit is made from the same materials as :MOVE mini and has been designed in keeping with the :MOVE mini aesthetic.
Once the add-on has been attached to :MOVE mini, the buggy can now easily be used for competitive games involving a ball or a puck, football and hockey spring to mind.
Note:
- This kit requires mechanical assembly.
Features:
- This attachment can be fitted quickly and easily.
- :MOVE mini will be able to move balls and pucks.
- Allows for competative team games such as football and hockey.
Contents:
- 1 x Set of Bumper parts.
- 2 x 10mm Counter sunk M3 screw.
《Tipper Trailer Add-On For The :MOVE MINI 連結拖車配件》
With this Tipper Truck add-on for :MOVE mini for the BBC microbit, everyone’s favourite little programmable robot buggy just got much better. Robots often do more than just :MOVE from A to B, and with this add-on so can :MOVE mini.
Previously on :MOVE mini, we; drew shapes, controlled it via bluetooth, controlled it with a second microbit, and we also coded a variety of light shows. Now, it can totally carry and dump stuff too!
This self assembly Tipper Truck add-on kit is made from the same materials as :MOVE mini, designed in keeping with the :MOVE mini aesthetic, and also comes with the servo required to move the Tipper Truck trailer up and down.
There is a very simple Servo:Lite board hack that enables the control of the third servo, you can find out how here. Once the kit is fully assembled, the Tipper Truck can be coded with the Microsoft MakeCode Editor.
Note:
- This kit requires mechanical assembly.
Features:
- When attached to :MOVE mini this kit offers a fun introduction to the world of DIY robotics.
- Code it with the Microsoft MakeCode Editor.
- Use in conjunction with an App and control it over Bluetooth.
- Use the radio function and a second microbit as a controller.
Contents:
- 1 x Set of Tipper Truck parts.
- 1 x Mini 180 Degree Servo.
- 8 x M2 6mm Pan head steel screw.
- 5 x M2 16mm Pan head steel screw.
- 8 x M2 Hex Full width nut.
- 2 x 6mm Counter sunk M3 screw.
- 2 x 10mm Counter sunk M3 screw.
- 2 x M3 Washers.
《簡介影片》
影片來源:https://youtu.be/lKl3wklqTNc